LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2011 >> Equator Base >> Repair and Diagnosis >> General Information >> OEM General Information >> Special Tools >> Special Service Tools >> Special Service Tools (Manual Transmission)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Special Service Tools (Manual Transmission)

The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.

Tool number (Kent-Moore No.) Tool name - Description
ST23540000
(J-25689-A)
Pin punch
G07041499
 Removing and installing retaining pin
  1. 2.3 mm (0.091 in) dia. 
  2. 4 mm (0.16 in) dia. 
ST30031000
(J-22912-01)
Puller
G07041500
  • Removing 1st and 2nd synchronizer assembly
  • Removing counter gear rear thrust bearing
  • Removing main drive bearing
  • Inspecting baulk ring wear

  1. 90 mm (3.54 in) dia. 
  2. 50 mm (1.97 in) dia. 
ST33290001
(J-34286)
Puller
G07041501
 Removing rear oil seal
ST33230000
(-)
Drift
G07041502
 Removing counter gear
  1. 51 mm (2.01 in) dia. 
  2. 28.5 mm (1.122 in) dia. 
ST22350000
(J-25678-01)
Drift
G07041503
 Removing counter gear front bearing (Use with KV38100300)
  1. 34 mm (1.34 in) dia. 
  2. 28 mm (1.10 in) dia. 
KV38100300
(J-25523)
Drift
G07041504
  • Removing counter gear front bearing (Use with ST22350000)
  • Installing counter gear rear bearing

  1. 54 mm (2.13 in) dia. 
  2. 32 mm (1.26 in) dia. 
ST30720000
  1. (-)
  2. (J-25405)

Drift
G07041505
  • Removing and installing mainshaft front bearing
  • Installing rear oil seal

  1. 77 mm (3.03 in) dia. 
  2. 55.5 mm (2.185 in) dia. 
ST33210000
  1. (J-25523)
  2. (J-25803-01)

Drift
G07041506
  • Installing counter gear front bearing
  • Installing front cover oil seal

  1. 44 mm (1.73 in) dia. 
  2. 24.5 mm (0.965 in) dia. 
ST30613000
(J-25742-3)
Drift
G07041507
 Installing main drive gear bearing
  1. 72 mm (2.83 in) dia. 
  2. 48 mm (1.89 in) dia. 
ST37750000
  1. (J-25863-01)
  2. (J-34332)
  3. (J-34334)
  4. (J-25679-01)

Drift
G07041508
  • Removing counter gear rear bearing
  • Installing OD gear bushing
  • Installing reverse cone
  • Installing reverse counter gear
  • Installing counter gear rear end bearing

  1. 40 mm (1.57 in) dia. 
  2. 31 mm (1.22 in) dia. 
ST22452000
(J-34337)
Drift
G07041509
 Installing reverse synchronizer hub
  1. 45 mm (1.77 in) dia. 
  2. 36 mm (1.42 in) dia. 
-
(J-26349-3)
Puller leg
G07041510
 Installing mainshaft and counter gear (Use with J-34328)
-
(J-34328)
Puller
G07041511
 Installing mainshaft and counter gear (Use with J-26349-3)
-
(J-34342)
Drift
G07041512
  • Installing OD main gear
  • Installing reverse gear bushing

  1. 44.5 mm (1.752 in) dia. 
  2. 40.5 mm (1.594 in) dia. 
-
(J-26349-A)
Bearing Remover and Installer Set
G07041513
 Removing and installing mainshaft rear bearing (Use with J-25726-B)
-
(J-25726-B)
Puller
G07041514
 Removing and installing mainshaft rear bearing (Use with J-26349-A)


The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.

Tool number (Kent-Moore No.) Tool name - Description
ST30911000
(-)
Inserter
G07041515
  • Installing mainshaft bearing
  • Installing 5th-6th synchronizer hub assembly
  • Installing reverse main gear bushing
  • Installing 3rd gear bushing
  • Installing 3rd-4th synchronizer hub assembly

  1. 98 mm (3.86 in) dia. 
  2. 40 mm (1.57 in) dia. 
ST30022000
(-)
Inserter
G07041516
  • Installing 3rd main gear
  • Installing 4th main gear

  1. 110 mm (4.33 in) dia. 
  2. 46 mm (1.81 in) dia. 
ST27861000
(-)
Support ring
G07041517
  • Installing 1st-2nd synchronizer hub assembly
  • Installing 1st gear bushing

  1. 62 mm (2.44 in) dia. 
  2. 52 mm (2.05 in) dia. 
ST30032000
(J-26010-01)
Inserter
G07041518
 Installing counter rear bearing inner race
  1. 80 mm (3.15 in) dia. 
  2. 31 mm (1.22 in) dia. 
KV32102700
(-)
Drift
G07041519
 Installing main drive gear bearing
  1. 48 mm (1.89 in) dia. 
  2. 41 mm (1.61 in) dia. 
ST23860000
(-)
Drift
G07041520
 Installing reverse counter gear
  1. 38 mm (1.50 in) dia. 
  2. 33 mm (1.30 in) dia. 
ST01530000
(-)
Drift
G07041521
 Installing reverse synchronizer hub assembly
  1. 50 mm (1.97 in) dia. 
  2. 41 mm (1.61 in) dia. 
KV381054S0
(J-34286)
Puller
G07041522
 Removing rear oil seal
ST33200000
(J-26082)
Drift
G07041523
  • Installing counter rear bearing
  • Installing rear oil seal

  1. 60 mm (2.36 in) dia. 
  2. 44.5 mm (1.752 in) dia. 
KV40100630
(J-26092)
Inserter
G07041524
 Installing 4th counter gear thrust washer
  1. 67 mm (2.64 in) dia. 
  2. 38 mm (1.50 in) dia. 
KV38102100
(J-25803-01)
Drift
G07041525
 Installing front cover oil seal
  1. 44 mm (1.73 in) dia. 
  2. 28 mm (1.10 in) dia. 
KV32103300
(J-46529)
Press plate
G07041526
 Installing reverse synchronizer hub assembly
  1. 73 mm (2.87 in) 
ST30031000
(J-22912-01)
Puller
G07041527
 Measuring wear of inner baulk ring
ST22490000
(-)
Adapter setting plate
G07041528
 Holding a adapter plate
ST33400001
(J-26082)
Drift
G07041529
 Installing oil seal
  1. 60 mm (2.36 in) dia. 
  2. 47 mm (1.85 in) dia. 
scientia non olet · About LEMON Manuals