LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2011 >> Equator Base >> Repair and Diagnosis >> General Information >> OEM General Information >> Special Tools >> Special Service Tools >> Special Service Tools (Differential)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Special Service Tools (Differential)

The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.

Tool number (Kent-Moore No.) Tool name - Description
KV381054S0
(J-34286)
Puller
G07041424
 Removing front oil seal
ST30720000
(J-25405)
Drift
G07041425
  • Installing front oil seal
  • Installing side oil seal

  1. 77 mm (3.03 in) dia. 
  2. 55.5 mm (2.185 in) dia. 
ST27863000
(-)
Drift
G07041426
  • Installing front oil seal
  • Installing side oil seal

  1. 74.5 mm (2.933 in) dia. 
  2. 62.5 mm (2.461 in) dia. 
ST3127S000
(J-25765-A)
Preload gauge
  1. GG91030000

    (J-25765)

    Torque wrench

  2. HT62940000

    (-)

    Socket adapter (1/2")

  3. HT62900000

(-)
Socket adapter (3/8")
G07041427
 Measuring drive pinion bearing preload torque and total preload torque
KV10111100
(J-37228)
Seal cutter
G07041428
 Removing carrier cover
ST3306S001
(-)
Differential side bearing puller set
  1. ST33051001

    (J-22888-20)

    Puller

  2. ST33061000

(J-8107-2)
Base
G07041429
 Removing and installing side bearing inner race
  1. 28.5 mm (1.122 in) dia. 
  2. 38 mm (1.50 in) dia. 
ST30031000
(J-22912-01)
Replacer
G07041430
 Removing drive pinion rear bearing inner race
KV38100600
(J-25267)
Drift
G07041431
 Installing side bearing adjusting washer
ST30613000
(J-25742-3)
Drift
G07041432
 Installing drive pinion rear bearing outer race
  1. 72 mm (2.83 in) dia. 
  2. 48 mm (1.89 in) dia. 
ST30611000
(J-25742-1)
Drift bar
G07041433
 Installing drive pinion rear bearing outer race (Use with ST30613000)
KV38100200
(J-26233)
Drift
G07041434
 Installing drive pinion front bearing outer race
  1. 65 mm (2.56 in) dia. 
  2. 49 mm (1.93 in) dia. 
ST30901000
(J-26010-01)
Drift
G07041435
 Installing drive pinion rear bearing inner race
  1. 79 mm (3.11 in) dia. 
  2. 45 mm (1.77 in) dia. 
  3. 35.2 mm (1.386 in) dia. 
ST33200000
(J-26082)
Drift
G07041436
 Installing drive pinion front bearing inner race
  1. 60 mm (2.36 in) dia. 
  2. 44.5 mm (1.752 in) dia. 
ST33230000
(J-35867)
Drift
G07041437
 Installing side bearing inner race
  1. 51 mm (2.01 in) dia. 
  2. 41 mm (1.61 in) dia. 
  3. 28 mm (1.10 in) dia. 
(-)
(J-34309)
Differential shim selector tool
G07041438
 Adjusting bearing preload and drive pinion height
(-)
(J-25269-18)
Side bearing disc (2 Req'd)
G07041439
 Selecting drive pinion height adjusting washer
KV10112100
(BT-8653-A)
Angle wrench
G07041440
 Tightening bolts for drive gear


The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.

Tool number (Kent-Moore No.) Tool name - Description
KV38100500
(J-25273)
Drift
G07041441
 Installing front oil seal
  1. 80 mm (3.15 in) dia. 
  2. 60 mm (2.36 in) dia. 
ST3127S000
(J-25765-A)
Preload gauge
  1. GG91030000

    (J-25765)

    Torque wrench

  2. HT62940000

    (-)

    Socket adapter (1/2")

  3. HT62900000

(-)
Socket adapter (3/8")
G07041442
 Measuring drive pinion bearing preload torque and total preload torque
KV10111100
(J-37228)
Seal cutter
G07041443
 Removing carrier cover
ST3306S001
(-)
Differential side bearing puller set
  1. ST33051001

    (J-22888-20)

    Puller

  2. ST33061000

(J-8107-2)
Base
G07041444
 Removing and installing side bearing inner race
  1. 28.5 mm (1.122 in) dia. 
  2. 38 mm (1.50 in) dia. 
ST30031000
(J-22912-01)
Puller
G07041445
 Removing drive pinion rear bearing inner race
KV38100600
(J-25267)
Drift
G07041446
 Installing side bearing adjusting washer
  1. 8 mm (0.31 in) 
  2. R42.5 mm (1.673 in) 
ST30621000
(J-25742-5)
Drift
G07041447
 Installing drive pinion rear bearing outer race
  1. 79 mm (3.11 in) dia. 
  2. 59 mm (2.32 in) dia. 
ST30613000
(J-25742-3)
Drift
G07041448
 Installing drive pinion front bearing outer race
  1. 72 mm (2.83 in) dia. 
  2. 48 mm (1.89 in) dia. 
ST30611000
(J-25742-1)
Drift bar
G07041449
 Installing drive pinion front bearing outer race
[Use with ST30613000 (J-25742-3) and ST30621000 (J-25742-5)]
ST30901000
(J-26010-01)
Drift
G07041450
 Installing drive pinion rear bearing inner race
  1. 79 mm (3.11 in) dia. 
  2. 45 mm (1.77 in) dia. 
  3. 35.2 mm (1.386 in) dia. 
ST33230000
(J-25805-01)
Drift
G07041451
 Installing side bearing inner race
  1. 51 mm (2.01 in) dia. 
  2. 41 mm (1.61 in) dia. 
  3. 28.5 mm (1.122 in) dia. 
-
(J-8129)
Spring gauge
G07041452
 Measuring turning torque
-
(J-34309)
Differential shim selector tool
G07041453
 Adjusting bearing preload and pinion gear height
-
(J-25269-4)
Side bearing disc (2 Req'd)
G07041454
 Selecting pinion height adjusting washer


The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.

Tool number (Kent-Moore No.) Tool name - Description
ST33290001
(J-34286)
Puller
G07041455
 Removing front oil seal
ST15310000
(-)
Drift
G07041456
 Installing front oil seal
  1. 96 mm (3.77 in) dia. 
  2. 84 mm (3.30 in) dia. 
ST3127S000
(J-25765-A)
Preload gauge set
  1. GG91030000

    (J-25765)

    Torque wrench

  2. HT62940000 (1/2")

    (-)

    Socket adapter

  3. HT62900000 (3/8")

(-)
Socket adapter
G07041457
 Inspecting drive pinion bearing preload and total preload
-
(C-4164)
Adjuster tool
G07041458
 Removing and installing side bearing adjuster
KV10111100
(J-37228)
Seal cutter
G07041459
 Removing carrier cover
ST23550000
(-)
G07041460
 Removing and installing lock pin
  1. 4.5 mm (0.177 in) dia. 


The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.

Tool number (Kent-Moore No.) Tool name - Description
ST33290001
(J-34286)
Puller
G07041461
 Removing front oil seal
ST15310000
(-)
Drift
G07041462
 Installing front oil seal
  1. 96 mm (3.77 in) dia. 
  2. 84 mm (3.30 in) dia. 
ST3127S000
(J-25765-A)
Preload gauge set
  1. GG91030000

    (J-25765)

    Torque wrench

  2. HT62940000 (1/2")

    (-)

    Socket adapter

  3. HT62900000 (3/8")

(-)
Socket adapter
G07041463
 Inspecting drive pinion bearing preload torque and total preload torque
-
(C-4164)
Adjuster tool
G07041464
 Removing and installing side bearing adjuster
KV10111100
(J-37228)
Seal cutter
G07041465
 Removing carrier cover


The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.

Tool number (Kent-Moore No.) Tool name - Description
ST33290001
(J-34286)
Puller
G07041466
  • Removing front oil seal
  • Removing rear oil seal
  • Removing metal bushing
KV38100500
(-)
Drift
G07041467
  • Installing front oil seal
  • Installing rear oil seal
  • Installing rear bearing
  • Installing front bearing

  1. 80 mm (3.15 in) dia. 
  2. 60 mm (2.36 in) dia. 
KV40105310
(-)
Drift
G07041468
  • Installing dust cover

  1. 89 mm (3.50 in) dia. 
  2. 80.7 mm (3.17 in) dia. 
KV38100200
(-)
Drift
G07041469
  • Removing sun gear assembly and planetary carrier assembly
  • Removing input bearing
  • Installing sun gear assembly and planetary carrier assembly

  1. 65 mm (2.56 in) dia. 
  2. 49 mm (1.93 in) dia. 
ST30720000
(J-25405)
Drift
G07041470
  • Installing input bearing
  • Installing input oil seal
  • Installing carrier bearing

  1. 77 mm (3.03 in) dia. 
  2. 55 mm (2.17 in) dia. 
KV32102700
(-)
Drift
G07041471
  • Installing mainshaft rear bearing

  1. 48 mm (1.89 in) dia. 
  2. 41 mm (1.61 in) dia. 
KV40104830
(-)
Drift
G07041472
  • Installing input oil seal

  1. 70 mm (2.76 in) dia. 
  2. 63.5 mm (2.50 in) dia. 
ST35300000
(-)
Drift
G07041473
  • Removing carrier bearing
  • Installing metal bushing
  • Removing front bearing

  1. 59 mm (2.32 in) dia. 
  2. 45 mm (1.77 in) dia. 
ST30021000
(J-22912-01)
Puller
G07041474
  • Removing carrier bearing
  • Removing front bearing
  • Removing rear bearing
ST33710000
(-)
Drift
G07041475
  • Removing needle bearing
  • Removing metal bushing
  • Removing rear bearing

  1. 89 mm (3.5 in) 
  2. 30 mm (1.18 in) dia. 
  3. 24 mm (0.94 in) dia. 
ST35325000
(-)
Drift bar
G07041476
  • Removing metal bushing

  1. 215 mm (8.46 in) 
  2. 25 mm (0.98 in) dia. 
  3. M12 x 1.5P 
ST33220000
(-)
Drift
G07041477
  • Installing needle bearing

  1. 37 mm (1.46 in) dia. 
  2. 31 mm (1.22 in) dia. 
  3. 22 mm (0.87 in) dia. 
ST27863000
(-)
Drift
G07041478
  • Installing carrier bearing

  1. 75 mm (2.95 in) dia. 
  2. 62 mm (2.44 in) dia. 
ST30901000
(J-26010-01)
Drift
G07041479
  • Installing rear bearing
  • Installing front bearing

  1. 79 mm (3.11 in) dia. 
  2. 45 mm (1.77 in) dia. 
  3. 35.2 mm (1.38 in) dia. 
scientia non olet · About LEMON Manuals