Piston Selection Table
WARNING: This page is about a different variant/trim than selected.
PISTON GRADE REFERENCE
| Unit: mm (in) | |||
|---|---|---|---|
| Grade | 1 | 2 (or no mark) | 3 |
| Cylinder bore inner diameter | 95.500 - 95.510 (3.7598 - 3.7602) | 95.510 - 95.520 (3.7602 - 3.7606) | 95.520 - 95.530 (3.7606 - 3.7610) |
| Piston skirt diameter | 95.480 - 95.490 (3.7590 - 3.7594) | 95.490 - 95.500 (3.7594 - 3.7598) | 95.500 - 95.510 (3.7598 - 3.7602) |
NOTE:
- Piston is available together with piston pin as assembly.
- Piston pin (piston pin hole) grade is provided only for the parts installed at the plant. For service parts, no piston pin grades can be selected. (Only (0) grade is available.)
- No second grade mark is available on piston.