Diagnosis Procedure
WARNING: This page is about a different variant/trim than selected.
DIAGNOSIS PROCEDURE
| Step | Action | YES | NO |
|---|---|---|---|
| 1 | CHECK TIRES Check the following. Refer to [SERVICE DATA AND SPECIFICATIONS ].
Are the inspection results normal? |
GO TO 2. | Repair or replace damaged parts. |
| 2 | SYMPTOM CHECK Check again. Does the symptom still occur? |
GO TO 3. | Inspection End. |
| 3 | CHECK TRANSFER CONTROL UNIT Check transfer control unit input/output signal. Refer to [TRANSFER CONTROL UNIT: REFERENCE VALUE ]. Are the inspection results normal? |
Inspection End. | Check transfer control unit pin terminals for damage or loose connection with harness connector. If any items are damaged, repair or replace damaged parts. |