Removal Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Disconnecting Engine Wiring Harness Electrical Connector

Courtesy of SUZUKI OF AMERICA CORP.

Remove the air cleaner assembly. Refer to REMOVAL PROCEDURE .
Disconnect the engine wiring harness electrical connector (2) from the bank 1 intake camshaft position (CMP) sensor.

Fig 2: Identifying CMP Sensor & Bolt
Courtesy of SUZUKI OF AMERICA CORP.
Remove the CMP sensor bolt.
Remove the CMP sensor.