Installation Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Wheel Bearing/Hub Assembly To Steering Knuckle

Courtesy of SUZUKI OF AMERICA CORP.

Install the wheel bearing/hub assembly to the steering knuckle.
CAUTION: Refer to FASTENER NOTICE .
Install the wheel bearing/hub mounting bolts.
Tightening torque

Tighten the bolts to 130 N.m (96 lb ft) .

Fig 2: Identifying Wheel Drive Shaft Spindle Nut
Courtesy of SUZUKI OF AMERICA CORP.
Install the wheel drive shaft spindle nut.
Tightening torque

Tighten the nut to 205 N.m (151 lb ft) .

Fig 3: Identifying Wheel Speed Sensor Electrical Connector To Mounting Bracket
Courtesy of SUZUKI OF AMERICA CORP.
Install the wheel speed sensor electrical connector to the mounting bracket, if equipped.

Fig 4: Identifying Wheel Speed Sensor Electrical Connector
Courtesy of SUZUKI OF AMERICA CORP.
Connect the wheel speed sensor electrical connector.
Install the speed sensor. Refer to FRONT WHEEL SPEED SENSOR REPLACEMENT .

Fig 5: Identifying Front Brake Rotor
Courtesy of SUZUKI OF AMERICA CORP.
Install the front brake rotor. Refer to FRONT BRAKE ROTOR REPLACEMENT .