Installation Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Rotating Lock Cylinder In Housing

Courtesy of SUZUKI OF AMERICA CORP.

NOTE: If you are installing a new lock cylinder, refer to KEY AND LOCK CYLINDER CODING .

Position the lock cylinder in the run position. Insert the cylinder into the lock housing.
Rotate the lock cylinder in the housing. Verify proper rotation.
Install the steering column trim covers. Refer to STEERING COLUMN TRIM COVERS REPLACEMENT .
Enable the SIR system. Refer to SIR Disabling and Enabling .
Connect the negative battery cable. Refer to INSTALLATION PROCEDURE .