Remote Power Steering Fluid Reservoir Replacement

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Remote Power Steering Fluid Reservoir Components

Courtesy of SUZUKI OF AMERICA CORP.

ACTION REFERENCE TABLE

Callout	Component Name
Preliminary Procedures Remove the fuel injector sight shield. Refer to REMOVAL PROCEDURE Remove the air cleaner outlet duct. Refer to REMOVAL PROCEDURE . Remove the right side engine splash shield. Refer to ENGINE SPLASH SHIELD REPLACEMENT - RIGHT SIDE .
1	Power Steering Reservoir Outlet Hose Clamp Procedure Remove as much power steering fluid from the remote power steering fluid reservoir as possible. Place drain pans under the vehicle as needed.
2	Power Steering Fluid Reservoir Outlet Hose
3	Power Steering Cooler Pipe Clamp
4	Power Steering Cooler Pipe
5	Remote Power Steering Fluid Reservoir Bolts (Qty: 2) CAUTION: Refer to FASTENER NOTICE . Tightening torque 9 N.m (80 lb in)
6	Remote Power Steering Fluid Reservoir Bolt Tightening torque 9 N.m (80 lb in)
7	Ground Terminal Nut Tightening torque 9 N.m (80 lb in)
8	Ground Terminal
9	Power Steering Fluid Reservoir Stud Tightening torque 9 N.m (80 lb in)
10	Remote Power Steering Fluid Reservoir Procedure Fill and bleed the power steering system. Refer to POWER STEERING SYSTEM BLEEDING .