Removal Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Engine Wiring Harness Electrical Connectors

Courtesy of SUZUKI OF AMERICA CORP.

Remove the air cleaner outlet duct. Refer to REMOVAL PROCEDURE .
Disconnect the engine wiring harness electrical connector (1) from the throttle actuator control (TAC) module.

Fig 2: Identifying Throttle Body & Gasket
Courtesy of SUZUKI OF AMERICA CORP.
Remove the throttle body bolts.
Remove the throttle body and gasket. Discard the gasket.