Installation Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Rear Exhaust Manifold Heat Shield Bolts & Shield (2 Of 2)

Courtesy of SUZUKI OF AMERICA CORP.

CAUTION: Refer to FASTENER NOTICE .

Position the rear exhaust manifold heat shield to the engine and install the bolts.
Tightening torque

Tighten the bolts to 50 N.m (37 lb ft).
Lower the vehicle.