Driveline Runout Specifications
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
DRIVELINE RUNOUT SPECIFICATIONS
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Differential Pinion Input Shaft or Flange Pilot | 0.05 mm | 0.002 in |
| Torque Tube Input Flange | 0.20 mm | 0.008 in |
| Transmission or Transfer Case Output Flange | 0.20 mm | 0.008 in |
| These guidelines apply only to propeller shaft systems with a constant velocity (CV) joint, rubber coupling, or bolt-on U-joint yoke. | ||