LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2011 >> Equator Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Engine Cooling System) >> Repair Instructions >> Thermostat Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Thermostat Housing Bolts
G04842650Courtesy of SUZUKI OF AMERICA CORP.
  1. Install the thermostat with a NEW thermostat seal.
    CAUTION: Refer to FASTENER NOTICE .
  2. Install the thermostat housing bolts.

    Tightening torque 

    Tighten the thermostat housing bolts to 10 N.m (89 lb in)  .

  3. Install the heater inlet and outlet pipes. Refer to INSTALLATION PROCEDURE  and INSTALLATION PROCEDURE .
  4. Fill the cooling system. Refer to DRAINING AND FILLING COOLING SYSTEM (LY7 GE 47716 FILL)  and DRAINING AND FILLING COOLING SYSTEM (LY7 STATIC FILL) .
scientia non olet · About LEMON Manuals