Instrument Panel Lower Center Trim Panel Replacement

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Instrument Panel Center Lower Trim Panel Assembly & Screws

Courtesy of SUZUKI OF AMERICA CORP.

INSTRUMENT PANEL LOWER CENTER TRIM PANEL REFERENCE TABLE

Callout	Component Name
Preliminary Procedures Remove the Knee Bolster Assembly. Refer to KNEE BOLSTER REPLACEMENT . Remove the Instrument Panel Upper Trim Panel. Refer to INSTRUMENT PANEL UPPER TRIM PANEL REPLACEMENT . Remove the left Console Trim Panel. Refer to FRONT FLOOR CONSOLE SIDE TRIM PANEL REPLACEMENT - LEFT SIDE .
1	Lower Instrument Panel Trim Panel Assembly Screws (Qty 4) CAUTION: Refer to FASTENER NOTICE . Tightening torque 2 N.m (18 lb in) The left lower trim panel, center lower trim panel, and the cluster trim bezel are removed as an assembly. Disconnect the electrical connections.
2	Retainer Clips (Qty 2)
3	Instrument Panel Center Lower Trim Panel Assembly Screws (Qty 3). Tightening torque 2 N.m (18 lb in)
4	Instrument Panel Center Lower Trim Panel Assembly Tip: If replacing the center lower trim panel, transfer all necessary components.