Third Gear Band Servo Piston Installation

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Reference: THIRD GEAR BAND SERVO PISTON ASSEMBLE .

Fig 1: Identifying Third Gear Band Servo Compression Spring & Piston Assembly

Courtesy of SUZUKI OF AMERICA CORP.

Apply automatic transmission fluid to the third gear band servo bore in the transmission case.
Install the third gear band servo compression spring (56) and the third gear band servo piston assembly (57) to the transmission case.

Fig 2: Identifying Third Gear Band Servo Cover O-Ring Seals & Third Gear Band Servo Cover
Courtesy of SUZUKI OF AMERICA CORP.
Apply automatic transmission fluid to the 2 new third gear band servo cover O-ring seals (58).
Install the third gear band servo cover O-ring seals (58) onto the third gear band servo cover (59).
Install third gear band servo cover (59) into the third gear band servo bore in the transmission case.

Fig 3: Installing Third Gear Band Servo Cover Retaining Ring
Courtesy of SUZUKI OF AMERICA CORP.

NOTE: If the third gear band servo cover retaining ring (60) is deformed, replace it.
Using snap ring pliers, install the third gear band servo cover retaining ring (60) while pressing the third gear band servo cover into the third gear band servo bore to properly seat the retaining ring.
Reference: 1-2-REVERSE CARRIER GEAR ASSEMBLY INSTALLATION .