Installation Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Left Axle Seal (Left)

Courtesy of SUZUKI OF AMERICA CORP.

Using the J 44809, install the left axle seal into the transaxle.
Install the left front axle shaft. Refer to INSTALLATION PROCEDURE and INSTALLATION PROCEDURE .
Lower the vehicle.
NOTE: Dextron®III automatic transmission fluid is not compatible with this transaxle. If Dextron®III ATF is used, transaxle failure will result. This transaxle uses GM T-IV fluid GM P/N 88900925.
Inspect the transaxle fluid level. Refer to TRANSMISSION FLUID CHECK .