Removal Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Remove the control valve body cover. Refer to REMOVAL PROCEDURE .

Fig 1: Identifying Wiring Harness Connectors
Courtesy of SUZUKI OF AMERICA CORP.
Disconnect the wiring harness connectors (1-8).

Fig 2: Identifying Fluid Temperature Sensor Bolt & Clamp
Courtesy of SUZUKI OF AMERICA CORP.
Remove the fluid temperature sensor bolt (31).
Remove the fluid temperature sensor clamp (49).
Remove the fluid temperature sensor (36) and the O-ring (32) from the control valve body.

Fig 3: Identifying A/T Control Wiring Harness Connector Retainer
Courtesy of SUZUKI OF AMERICA CORP.
Remove the A/T control wiring harness connector retainer (69).

Fig 4: Identifying Transmission Wiring Harness Assembly, TCM Seal & Wiring Connector Seal
Courtesy of SUZUKI OF AMERICA CORP.
Remove the transmission wiring harness assembly (33) from the transmission case assembly through the wiring harness bore.
Remove the TCM seal (72) and the automatic transmission wiring connector seal (46) from the connector.