Lumbar Support Actuator Replacement

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Lumbar Support Actuator Components

Courtesy of SUZUKI OF AMERICA CORP.

LUMBAR SUPPORT ACTUATOR COMPONENTS REFERENCE

Callout	Component Name
Fastener Tightening Specifications: Refer to FASTENER TIGHTENING SPECIFICATIONS - POWER SEATS . Preliminary Procedures Remove the front seat. Refer to FRONT SEAT REPLACEMENT - BUCKET . Adjust the lumbar support knob until the lumbar basket is in the position of least support. Remove the barrel end of the cable from the lumbar actuator.
1	Front Seat Recliner Handle Tip: Pull firmly forward on the handle to remove.
2	Front Seat Outer Adjuster Finish Cover Refer to FRONT SEAT CUSHION OUTER TRIM PANEL REPLACEMENT (NON FOLD FLAT) and FRONT SEAT CUSHION OUTER TRIM PANEL REPLACEMENT (FOLD FLAT) .
3	Front Seat Belt Buckle Refer to FRONT SEAT BELT BUCKLE REPLACEMENT .
4	Front Seat Inner Adjuster Finish Panel Refer to FRONT SEAT CUSHION INNER TRIM PANEL REPLACEMENT (NON FOLD FLAT) and FRONT SEAT CUSHION INNER TRIM PANEL REPLACEMENT (FOLD FLAT) .
5	Front Seat Lumbar Support Actuator Knob Tip: Remove the lumbar knob by pulling firmly on the knob.
6	Front Seat Cushion Cover and Pad Refer to FRONT SEAT CUSHION COVER AND PAD REPLACEMENT .
7	Front Seat Lumbar Support Actuator Screw (Qty: 2) CAUTION: Refer to FASTENER NOTICE . Tightening torque 2 N.m (18 lb in)
8	Front Seat Lumbar Support Actuator