LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2011 >> Equator Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine General Information And Diagnosis (Qr25DE) - (5 Of 5) >> ASCD Brake Switch Circuit Check >> Component Inspection >> ASCD Clutch Switch
April 5, 2026: LEMON Manuals is launched! Read the announcement.

ASCD Clutch Switch

  1. Turn ignition switch OFF.
  2. Disconnect ASCD clutch switch harness connector.
  3. Check continuity between ASCD clutch switch terminals 1 and 2 under the following conditions.
    Fig 1: Checking Continuity Between ASCD Clutch Switch Terminals 1 And 2
    G06444381Courtesy of SUZUKI OF AMERICA CORP.
    CONTINUITY CHART

    Condition Continuity
    Clutch pedal: Fully released Should exist
    Clutch pedal: Slightly depressed Should not exist

    If NG, adjust ASCD clutch switch installation, refer to [CLUTCH PEDAL: ON-VEHICLE INSPECTION AND ADJUSTMENT ], and perform step  3 again.

scientia non olet · About LEMON Manuals