Generator: Removal and Installation - VQ40DE Models: Installation

Installation is in the reverse order of removal.

• Install the generator and check tension of drive belt. Refer to [DRIVE BELTS: ADJUSTMENT ]

  Terminal "1" nut: 10.8 N.m (1.1 kg-m, 8 ft-lb) 

  CAUTION: Be sure to tighten terminal "1" nut carefully.
• For this model, the power generation voltage variable control system that controls the power generation voltage of the generator has been adopted. Therefore, the power generation voltage variable control system operation inspection should be performed after replacing the generator, and then make sure that the system operates normally. Refer to [POWER GENERATION VOLTAGE VARIABLE CONTROL SYSTEM OPERATION INSPECTION ].