Front Power Window Switch: Removal and Installation: Removal

Using a suitable tool, release the metal clip and pawls, then lift upward the front power window/door lock switch and finisher (2) - RH as an assembly.

Fig 1: Identifying Front Power Window Switch, Finisher And Tabs
Courtesy of SUZUKI OF AMERICA CORP.
Disconnect the harness connector.
Remove the front power window/door lock switch and finisher (2) - RH assembly from the front door finisher.
Release the four tabs (A), two on each side, then separate the front power window/door lock switch (1) - RH from the front power window/door lock switch finisher (2) - RH.