LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2011 >> Equator Base >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Body Electrical Control System >> Diagnostic Information and Procedure >> Combination Switch Circuit Check >> Diagnosis Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnosis Procedure

DIAGNOSIS PROCEDURE

Step Action YES NO
1  CHECK LIGHT & TURN SIGNAL SWITCH 
Check operation with normal light & turn signal switch installed.
Does it operate normally? 		 Replace light & turn signal switch. Refer to [LIGHTING & TURN SIGNAL SWITCH: REMOVAL AND INSTALLATION ] GO TO 2
2  CHECK WIPER & WASHER SWITCH 
Check operation with normal wiper & washer switch installed.
Does it operate normally? 		 Replace wiper & washer switch. Refer to [WIPER AND WASHER SWITCH: ON-VEHICLE REPAIR ] GO TO 3
3  CHECK SWITCH BASE (SPIRAL CABLE) 
Check operation with normal switch base (spiral cable) installed.
Does it operate normally? 		 Replace switch base (spiral cable). Refer to [SPIRAL CABLE: REMOVAL AND INSTALLATION ] Combination switch is normal.
scientia non olet · About LEMON Manuals