Removal and Installation

Ignition Coil: Removal and Installation

Removal (LH)

1) Move aside harness, harness bracket, and hoses located above ignition coil.
2) Disconnect the harness connector from ignition coil.
3) Remove the ignition coil.

CAUTION:
Do not shock ignition coil.

Installation (LH)

Installation is in the reverse order of removal.

Removal (RH)

1) Remove intake manifold collector. Refer to [Intake Manifold Collector: Removal and Installation] Intake Manifold Collector Removal and Installation.
2) Move aside harness, harness bracket, and hoses located above ignition coil.
3) Disconnect the harness connector from ignition coil.
4) Remove the ignition coil.

CAUTION:
Do not shock ignition coil.

Installation (RH)

Installation is in the reverse order of removal.