Road Test: Notes
The purpose of this test is to diagnose trouble conditions accurately and to check the condition after servicing. Also check for shift shock or abnormal noise.
WARNING:
- Carry out test in very little traffic area to prevent an accident.
- Test requires 2 persons, a driver and a tester.
- Check CVT fluid level.
- Warm up engine.
- With engine running at idle, shift select lever "D" range.
- Accelerate vehicle speed by depressing accelerator pedal gradually.
- While driving in "D" range, check if gear shift and lock-up occur properly as shown in CVT GEAR SHIFT TABLE .