LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2010 >> SX4 Crossover, 4WD, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Electrical Devices >> Repair Instructions >> Knock Sensor Removal and Installation >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Knock Sensor Removal and Installation: Removal

  1. Disconnect negative cable from battery.
  2. Hoist vehicle.
  3. Disconnect knock sensor connector.
  4. Remove knock sensor (1) from cylinder block.
scientia non olet · About LEMON Manuals