Gear Shift and Select Shaft Assembly Disassembly and Reassembly

Reference: MANUAL TRANSAXLE UNIT DISMOUNTING AND REMOUNTING 

Reference: GEAR SHIFT AND SELECT SHAFT ASSEMBLY REMOVAL AND INSTALLATION 

Reference: GEAR SHIFT AND SELECT SHAFT ASSEMBLY COMPONENTS 

1. Push spring pins out using special tool as shown bellow.

   Special Tool 

   1. 09925-78210 6.0 mm 
2. Inspect component parts for wear, distortion or damage. If any detect is found, replace detective part with new one.
   NOTE: When driving in spring pins, prevent shaft from being bent by supporting it with wood block.
   Fig 1: Exploded View Of Gear Shift And Select Shaft Assembly

   Courtesy of SUZUKI OF AMERICA CORP.