Accessory Drive Belt Removal and Installation: Installation

Reference: ACCESSORY DRIVE BELT TENSION INSPECTION 

1. Loosen belt tension by turning tensioner (1) clockwise.
   CAUTION: Do not turn tensioner pulley with a torque higher than 59 N.m (6.0 kgf-m, 43.5 lbf-ft).
2. While keeping tensioner in the loose position install accessory drive belt (2).
   Fig 1: Loosening Belt Tension By Turning Tensioner Clockwise

   Courtesy of SUZUKI OF AMERICA CORP.
3. Connect negative (-) cable to battery.