April 5, 2026: LEMON Manuals is launched! Read the announcement.

Reduction Driven Gear Assembly Disassembly and Reassembly: Reassembly

CAUTION:

Bevel gear and pinion must be replaced as a set when either replacement becomes necessary.
When replacing taper roller bearing, replace as inner race and outer race assembly.

Install right bearing (1) to reduction driven gear (2) using special tools and hydraulic press.
Special Tool
1. 09924-74510
2. 09925-16310
  
  Fig 1: Installing Right Bearing To Reduction Driven Gear Using Special Tools
  Courtesy of SUZUKI OF AMERICA CORP.
Install bevel gear (1) to reduction driven gear (2) using special tools and hydraulic press.
Special Tool
1. 09924-07710
2. 09924-84510-005
3. 09925-15410
  
  Fig 2: Installing Bevel Gear To Reduction Driven Gear Using Special Tools
  Courtesy of SUZUKI OF AMERICA CORP.
Install left bearing (1) to reduction driven gear (2) using special tools and hydraulic press.
Special Tool
1. 09913-84510
2. 09924-84510-005
  
  Fig 3: Installing Left Bearing To Reduction Driven Gear Using Special Tools
  Courtesy of SUZUKI OF AMERICA CORP.