Road Test

Road Test
The purpose of this test is to diagnose trouble conditions accurately and to check the condition after servicing. Also check for shift shock or abnormal noise.

WARNING:
^ Carry out test in very little traffic area to prevent an accident.
^ Test requires 2 persons, a driver and a tester.

1) Check CVT fluid level.
2) Warm up engine.
3) With engine running at idle, shift select lever "D" range.
4) Accelerate vehicle speed by depressing accelerator pedal gradually.
5) While driving in "D" range, check if gear shift and lock-up occur properly as shown in CVT Gear Shift Table.

CVT Gear Shift Table
CVT gear shift schedule is shown in the following table. Test-drive the vehicle on a flat road in the "D" position.

NOTE:
The values are for reference only.

Shift table





Lock-up point