Rear Door Lock Assembly Removal and Installation
Rear Door Lock Assembly Removal and InstallationRemoval
1. Remove rear door glass referring to Rear Door Glass Removal and Installation.
2. Disconnect door lock motor lead wire.
3. Remove door latch mounting screws (1) and remove door latch assembly (2).
Installation
Reverse removal procedure to install rear door lock assembly referring to the following instruction and Front Door Lock Assembly Removal and Installation.
- Tighten door latch screw to specified torque.
Tightening torque
Door latch screw (a): 5.0 N.m (0.5 kg-m, 4.0 lbf-ft)
- Install door trim referring to Rear Door Glass Removal and Installation.