Drive Belt: Service and Repair
Accessory Drive Belt Removal and InstallationRemoval
1. Disconnect negative (-) cable from battery.
2. Loosen belt tensioner by turning tensioner (1) clockwise.
CAUTION: Do not turn tensioner pulley with a torque higher than 59 N.m (6.0 kgf-m, 43.5 lbf-ft).
3. While keeping tensioner in the loose position remove accessory drive belt (2).
Installation
1. Loosen belt tension by turning tensioner (1) clockwise.
CAUTION: Do not turn tensioner pulley with a torque higher than 59 N.m (6.0 kgf-m, 43.5 lbf-ft).
2. While keeping tensioner in the loose position install accessory drive belt (2).
3. Connect negative (-) cable to battery.