LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2010 >> Kizashi SLS, FWD, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine General Information And Diagnosis >> Diagnostic Information and Procedures >> DTC P2138 >> DTC Troubleshooting
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Troubleshooting

DIAGNOSTIC PROCEDURES CHART

Step Action YES NO
Was "Engine and Emission Control System Check" performed?  Go to Step 2. Go to ENGINE AND EMISSION CONTROL SYSTEM CHECK .
Wire harness check 
  1. Check the following points.
    • "A1", "A2" and "A3" circuits: Refer to Step 2 through 5 of DTC P2122/P2123 .
    • "B1", "B2" and "B3" circuits: Refer to Step 2 through 5 of DTC P2127/P2128 .

Are they in good condition? 
Go to step 3. Repair or replace defective wire harness.
APP sensor check 
  1. Check APP sensor, see APP SENSOR INSPECTION .

Is it in good condition? 
Replace ECM and recheck DTC, see ECM REMOVAL AND INSTALLATION . Replace accelerator pedal assembly (with APP sensor), see ACCELERATOR PEDAL ASSEMBLY (INCORPORATING APP SENSOR) REMOVAL AND INSTALLATION .