DTC Troubleshooting
DIAGNOSTIC PROCEDURES CHART
| Step | Action | YES | NO |
|---|---|---|---|
| 1 | Was "Engine and Emission Control System Check" performed? | Go to Step 2. | Go to ENGINE AND EMISSION CONTROL SYSTEM CHECK . |
| 2 | DTC check
Is there any CAN-DTC? |
Go to CAN DTC (LOST COMMUNICATION AND COMMUNICATION BUS OFF) TABLE . | Go to Step 3. |
| 3 | Fuel level sensor circuit check
Is it in good condition? |
Go to Step 4. | Repair or replace defective wire harness. |
| 4 | Fuel level sensor check
Is it in good condition? |
Go to Step 5. | Repair or replace defective parts. |
| 5 | DTC recheck
Are DTC P0462 and P0463 still detected? |
Replace ECM and recheck DTC, see ECM REMOVAL AND INSTALLATION . | End. |