DTC Detecting Condition and Trouble Area
DTC DETECTING CONDITION CHART
| DTC detecting condition |
Trouble area |
P0010: "A" Camshaft Position Actuator Circuit/Open
This DTC is detected if any one of the following conditions is met.
- Electric current of OCV drive circuit is lower than 0.2 A for 2 sec. even if control duty ratio of OCV is higher than 45%.
- Electric current of OCV drive circuit is higher than 0.8 A for 2 sec. even if control duty ratio of OCV is lower than 15%.
(2 D/C detection logic) |
- OCV and/or its circuit
- ECM
|