DTC Confirmation Procedure
WARNING:
- Perform road test in a place where there is no traffic to prevent an accident.
- Road test should be performed by two persons, a driver and a tester, on a level road.
NOTE:
- Be sure to troubleshoot first unexpected DTCs previously detected in "DTC Confirmation Procedure".
- Confirm that the following conditions are met in this "DTC Confirmation Procedure".
- 10 V < Battery voltage < 16 V
- ECT >= -10 °C (14 °F)
- 450 rpm =< Engine speed < 6500 rpm (CVT model)
- 500 rpm =< Engine speed < 6500 rpm (M/T model)
- DTC P0102, P0103, P0335 or P0340 is not detected.
- Warm up engine to normal operating temperature.
- Drive vehicle at 80 - 100 km/h (50 - 62 mile/h) for 10 min. (Keep engine speed at 2,500 - 4,000 rpm in this step.)