Scan Tool Utility Table
SUZUKI scan tool has setting change function of BCM as follows. For more information, refer to SUZUKI Scan Tool Operator's Manual.
SCAN TOOL UTILITY CHART
| Item | Setting | Description |
|---|---|---|
| Turn Signal Light | 0/+1/+2/+3 | For situations such as lane changes, it is possible to set the number of times the turn signal lights flash when turn signal switch is momentarily switched on and off. 0: Turn signal lights flash on and off once when turn signal switch is turned on 1 time. +1: Turn signal lights flash on and off 2 times when turn signal switch is turned on 1 time. (+1 time on and off for 1 time switching on) +2: Turn signal lights flash on and off 3 times when turn signal switch is turned on 1 time. (+2 time on and off for 1 time switching on) +3: Turn signal lights flash on and off 4 times when turn signal switch is turned on 1 time. (+3 time on and off for 1 time switching on) |