Inspection of Power Window Anti-Pinching Function

Open door glass fully.
Place wood handle of hammer as shown in figure.
CAUTION: If vehicle is equipped with door visor, put hammer handle from inside the vehicle to prevent it from touching the visor.

NOTE: Use switch on each door when checking.
Activate auto up of power window.
Check that window glass automatically reverses to prevent pinching the hammer handle (to a point about 250 mm (9.84 in.) below outside top end (1) of glass run.), see Power Window System Initialization/Reset (Front Windows Only)
If the function is faulty, initialize power window system, see Power Window System Initialization/Reset (Front Windows Only) .

Fig 1: Checking Power Window Anti-Pinching
Courtesy of SUZUKI OF AMERICA CORP.