Tightening Torque Specifications
CAUTION:
For fastener with * (asterisk) below, be sure to tighten it according to specified procedure in "Repair Instructions".
TIGHTENING TORQUE SPECIFICATIONS
| Fastening part | Tightening torque | ||
|---|---|---|---|
| N.m | kgf-m | lbf-ft | |
| Fluid pressure check hole bolt | 7.5 | 0.76 | 5.5 |
| CVT fluid drain plug | 34 | 3.5 | 25.0 |
| Torque converter No. 1 bolt | 23 | 2.3 | 17.0 |
| Torque converter No. 2 bolt | 23 | 2.3 | 17.0 |
| CVT oil pan bolt* | 7.9 | 0.81 | 6.0 |
| Transmission range sensor bolt | 5.9 | 0.60 | 4.5 |
| Manual select lever nut | 17 | 1.7 | 12.5 |
| Primary pulley speed sensor bolt | 5.9 | 0.60 | 4.5 |
| Secondary pulley speed sensor bolt | 5.9 | 0.60 | 4.5 |
| CVT fluid cooler bracket bolt No. 1 | 20 | 2.0 | 15.0 |
| CVT fluid cooler bracket bolt No. 2 | 85 | 8.7 | 63.0 |
| CVT fluid cooler bolt | 13 | 1.3 | 9.5 |
NOTE:
The specified tightening torque is described in the following.
SELECT LEVER ASSEMBLY COMPONENTS
SELECT CABLE COMPONENTS
CVT ASSEMBLY COMPONENTS
CVT FLUID COOLER COMPONENTS
SELECT LEVER ASSEMBLY COMPONENTS
SELECT CABLE COMPONENTS
CVT ASSEMBLY COMPONENTS
CVT FLUID COOLER COMPONENTS
Reference:
For the tightening torque of fastener not specified in this section, refer to FASTENERS INFORMATION .