LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2010 >> Kizashi SE, FWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine General Information And Diagnosis >> Diagnostic Information and Procedures >> DTC P0016 >> DTC Troubleshooting
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Troubleshooting

DIAGNOSTIC PROCEDURES CHART

Step Action YES NO
1  Was "Engine and Emission Control System Check" performed?  Go to Step 2. Go to ENGINE AND EMISSION CONTROL SYSTEM CHECK .
2  CKP sensor circuit check 
  1. Check "B1", "B2" and "B3" circuits according to Step 3 through 4 of DTC P0335  .

Are they in good condition? 		 Go to Step 3. Repair or replace defective wire harness.
3  CMP sensor circuit check 
  1. Check "A1", "A2" and "A3" circuits according to Step 3 through 4 of DTC P0340  .

Are they in good condition? 		 Go to Step 4. Repair or replace defective wire harness.
4  CKP sensor and sensor plate check 
  1. Check CKP sensor and sensor plate.

Are they in good condition? 		 Go to Step 5. Repair or replace defective parts.
5  CMP sensor and signal rotor check 
  1. Check CMP sensor and signal rotor, see CMP SENSOR INSPECTION .

Are they in good condition? 		 Go to Step 6. Repair or replace defective parts.
6  Valve timing check 
  1. Check valve timing, see TIMING CHAIN AND CHAIN TENSIONER REMOVAL AND INSTALLATION .

Is it in good condition? 		 Replace ECM and recheck DTC, see ECM REMOVAL AND INSTALLATION . Adjust valve timing.
scientia non olet · About LEMON Manuals