LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2010 >> Kizashi SE, FWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Electronic Stability Program >> Diagnostics Information and Procedures >> DTC Clearance
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Clearance

WARNING: When performing driving test, select safe place where there is neither traffic jam nor any traffic accident possibility and take care not to occur an accident.
  1. Confirm that ignition mode of keyless push start system is in "OFF".
  2. Connect SUZUKI scan tool connector to DLC.
  3. Push engine switch to change the ignition mode of keyless push start system to "ON".
  4. Erase DTC according to instructions displayed on scan tool. Refer to scan tool operator's manual for further details.
  5. Perform "STEP 3: DRIVING TEST " in ESP® System Check  and DTC Check  and confirm that NO DTC is displayed on scan tool.
  6. Disconnect SUZUKI scan tool connector from DLC after completing the DTC clearance.
scientia non olet · About LEMON Manuals