DTC Confirmation Procedure
WARNING:
- Perform road test in a place where there is no traffic to prevent an accident.
- Road test should be performed by two persons, a driver and a tester, on a level road.
NOTE:
- Be sure to troubleshoot first unexpected DTCs previously detected in "DTC Confirmation Procedure".
- Confirm that the following conditions are met in this "DTC Confirmation Procedure".
- Engine speed >= 500 rpm
- DTC P0102, P0103, P0122, P0123, P0222 or P0223 is not detected.
- Warm up engine to normal operating temperature.
- Drive vehicle at 60 - 100 km/h (37 - 62 mile/h) for 1 min.