LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2010 >> Kizashi S, 4WD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Keyless Start System >> Repair Instructions >> Keyless Entry/TPMS Receiver Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Keyless Entry/TPMS Receiver Removal and Installation: Removal

  1. Disconnect negative (-) cable at battery.
  2. Remove left rear pillar trim.
  3. Disconnect connector (1), and then remove keyless entry/TPMS receiver (2)
    Fig 1: Identifying Keyless Entry / TPMS Receiver With Connector
    G06527963Courtesy of SUZUKI OF AMERICA CORP.