Removal and Replacement

Rain / Light Sensor Removal and Installation (If Equipped)

Removal
1. Remove harness cover.
2. Disconnect rain / light sensor connector (1).







3. Remove rain / light sensor by pushing claw (1) with flat-end screwdriver.







4. Remove silicone sheet (1).







Installation
1. Install silicone sheet on rain / light sensor.

NOTE: Be careful not to let air bubbles or dirt stuck in between silicone sheet and windshield.

2. Install rain / light sensor on windshield, and connect connector.

NOTE: Be careful not to let air bubbles or dirt stuck in between silicone sheet and rain / light sensor.

3. Install harness cover.
4. Initialize rain / light sensor.