Enable conditions
WARNING: This page is about a different variant/trim than selected.
PRESSURE CONTROL SOLENOID VALVE C ENABLE CONDITIONS
| Parameter | Minimum | Maximum |
|---|---|---|
| Battery voltage | 10.5 V | |
| Engine speed | 400 RPM | |
| Absolute pedal position | 8% | |
| Throttle position | 10% | 36% |
| Transmission fluid temperature | 20 °C (68 °F) | |
| 4L/N switch | OFF | |
| Output gear position | 4th and 5th | |
| Output shaft speed sensor | Normal condition or not monitored | |
| Input shaft speed sensor | Normal condition or not monitored | |
| Shift solenoid A, B and C | Normal condition or not monitored | |
| Pressure control solenoid B and C | Normal condition or not monitored | |
| Transmission range sensor | Normal condition or not monitored | |
| Transmission fluid temperature sensor | Normal condition or not monitored | |
| TCC circuit | Normal condition or not monitored | |
| CMP sensor | Normal condition or not monitored | |
| CKP sensor | Normal condition or not monitored | |
| TP sensor | Normal condition or not monitored | |
| CAN communication (U0073), (U0100) | Normal condition or not monitored | |