Enable conditions
WARNING: This page is about a different variant/trim than selected.
OUTPUT SHAFT SPEED SENSOR ENABLE CONDITIONS
| Parameter | Minimum | Maximum |
|---|---|---|
| Battery voltage | 10.5 V | |
| Engine speed | 400 RPM | |
| Output shaft speed (calculated from input shaft speed) | 300 RPM | |
| Gear position | 1st, 2nd and 3rd | |
| Shift position | "D", "3", or "L" range | |
| Transmission range sensor | Normal condition or not monitored | |
| Input shaft speed sensor | Normal condition or not monitored | |
| CMP sensor | Normal condition or not monitored | |
| CKP sensor | Normal condition or not monitored | |
| CAN communication (U0073), (U0100) | Normal condition or not monitored | |