CKP sensor Rationality Monitor
WARNING: This page is about a different variant/trim than selected.
OPERATION
| DTC(s) | P0335, P0336 |
| Monitor execution | Continuous |
| Monitoring Duration | P0335: Monitor 1,2: Not applicable P0336: Monitor 1,2: Not applicable Monitor 3: approx. 2 sec. |
ENABLE CONDITIONS
| Parameter | Min. | Max. |
|---|---|---|
| P0335 monitor 1: | ||
| Detected CMP sensor signal | 12 count | - |
| CMP sensor | No DTC (P0341, P0342, P0343 P0346, P0347, P0348, P0366, P0367, P0368, P0391, P0392, P0393) | |
| P0335 monitor 2, P0336 monitor 1, 2, 3: | ||
| Not applicable | ||
TYPICAL MALFUNCTION THRESHOLDS
| P0335: |
| Monitor 1: |
| No engine speed signal |
| Monitor 2: |
| Reference gap missing (sensor signal is available but no reference mark is detected) > 3 gaps |
| P0336: |
| Monitor 1: |
| Unexpected re-synchronization (loss of reference mark) > 6 count |
| Monitor 2: |
| Intermittent loss of engine speed signal > 28 count |
| Monitor 3: |
| Error count in which number of measured teeth per crankshaft revolution deviates from expected value > 8 counts |