Generator Removal and Installation: Removal

1. Disconnect negative (-) cable from battery.
2. Remove engine cover.
3. Remove accessory drive belt. See ACCESSORY DRIVE BELT REMOVAL AND INSTALLATION .
4. Remove air cleaner assembly.

   N32A: See AIR CLEANER ASSEMBLY REMOVAL AND INSTALLATION .

   J24B: See AIR CLEANER ASSEMBLY REMOVAL AND INSTALLATION .

5. Disconnect "B" terminal wire (1) and connector (2) from generator (3).
6. Remove generator (3).
7. For N32A, remove generator bracket (4) if necessary.

   N32A 

   Fig 1: Identifying Generator, Generator Bracket And Connector (N32A)

   Courtesy of SUZUKI OF AMERICA CORP.

J24B 

Fig 2: Identifying Generator, Generator Bracket And Connector (J24B)

Courtesy of SUZUKI OF AMERICA CORP.