LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2010 >> Grand Vitara Base, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Diagnostic Information and Procedures >> DTC Table
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Table

DTC CHART

DTC No. Detected item Detecting condition (DTC will set when detecting)
DTC P0504  Brake Switch "A"/"B" Correlation J24B model:  Both brake light switch signal voltage and brake pedal position switch signal voltage remain at low level for specified time continuously
N32A model:  Both brake light switch signal voltage and brake pedal position switch signal voltage remain at low level for specified time continuously when brake pedal is depressed
DTC P0575  Cruise Control Input Circuit
  • MAIN (ON/OFF) switch signal voltage remains at high level for specified time continuously
  • Cruise control command switch (CANCEL switch, RES/ACC switch and/or SET/COAST switch) signal voltage remains at low level for specified time continuously
DTC P0649  Speed Control Lamp Control Circuit "CRUISE / SET indicator light lighting signal" from combination meter remains unchanged even if ECM transmits request to turn on or turn off "CRUISE / SET indicator light control signal" to combination meter through CAN communication.
NOTE: During the engine running, DTC is detected by pushing the cruise control switch (MAIN (ON/OFF), CANCEL, RES/ACC, or SET/COAST) for more than specified period of time.