LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2010 >> Grand Vitara Base, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle - 4AT >> Repair Instructions >> Automatic Transmission Assembly Dismounting and Remounting >> Dismounting
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Automatic Transmission Assembly Dismounting and Remounting: Dismounting

  1. Dismount engine with transmission and transfer (4WD model) or extension case assembly (2WD model) referring to ENGINE ASSEMBLY REMOVAL AND INSTALLATION: J24B .
  2. Disconnect connectors from output shaft speed sensor, input shaft speed sensor, transmission range sensor, solenoid connector, transfer actuator (if equipped), differential lock switch (if equipped) and 4L/N switch (if equipped) release their wire harnesses from clamps.
  3. Remove transfer (4WD model) or extension case assembly (2WD model) from transmission referring to TRANSFER ASSEMBLY DISMOUNTING AND REMOUNTING: MOTOR-SHIFT TYPE (TRANSFER WITH SHIFT ACTUATOR) (4WD model), TRANSFER ASSEMBLY DISMOUNTING AND REMOUNTING: NON-SHIFT TYPE (TRANSFER WITHOUT SHIFT ACTUATOR) or EXTENSION CASE ASSEMBLY REMOVAL AND INSTALLATION (2WD model).
  4. Remove engine earth cable.
  5. Remove engine rear mounting member and rear mounting referring to ENGINE MOUNTINGS COMPONENTS: J24B .
  6. Remove oil filler tube.
  7. Remove cooler hose.
  8. Remove drive plate cover, and then remove drive plate bolts by holding crankshaft pulley bolt stationary.
  9. Remove starting motor referring to STARTING MOTOR REMOVAL AND INSTALLATION .
  10. Remove transmission assembly from engine assembly.
scientia non olet · About LEMON Manuals