Tightening Torque Specifications

WARNING: This page is about a different variant/trim than selected.

CAUTION: For fastener with * (asterisk) below, be sure to tighten it according to specified procedure in "Repair Instructions".

TIGHTENING TORQUE SPECIFICATIONS

Fastening part	Tightening torque
Fastening part	N.m	kgf-m	lbf-ft
Fluid pressure check hole bolt	8	0.8	6.0
A/T fluid drain plug	20	2.0	14.5
Manual selector assembly mounting bolt	18	1.8	13.0
Manual select cable end nut	13	1.3	9.5
Manual shift shaft nut	13	1.3	9.5
Transmission range sensor bolt	13	1.3	9.5
Input shaft speed sensor bolt	5.5	0.55	4.0
Output shaft speed sensor bolt	5.5	0.55	4.0
Oil pump body bolt	12	1.2	9.0
Oil pump bolt	21	2.1	15.5
Parking pawl bracket bolt	7.4	0.74	5.5
Valve body bolt	11	1.1	8.0
Solenoid connector bolt	5.5	0.55	4.0
Clamp bolt	11	1.1	8.0
Transmission fluid temperature sensor clamp bolt	10	1.0	7.5
Oil strainer bolt	10	1.0	7.5
Oil pan bolt	7	0.7	5.5
Drain plug	20	2.0	14.5
Transmission case adapter sub assembly bolt	34	3.4	24.5
Automatic transmission housing bolt	57	5.7	41.5
Automatic transmission housing bolt	34	3.4	24.5
Automatic transmission breather pipe bolt	5.5	0.55	4.0
Transmission speed sensor bolt	5.5	0.55	4.0
Oil cooler pipe union bolt	25	2.5	18.0
Manual select lever nut	12.5	1.25	9.0

Reference:

For the tightening torque of fastener not specified in this section, refer to FASTENER INFORMATION .