LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2010 >> Grand Vitara Base, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Automatic Transaxle - 5AT) >> Repair Instructions >> A/T Relay Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

A/T Relay Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect negative cable at battery.
  2. Remove power integration No. 2 (1) from fuse box No. 2 (2).
    Fig 1: Removing Power Integration No. 2 From Fuse Box No. 2
    G06500124Courtesy of SUZUKI OF AMERICA CORP.
  3. Check that there is no continuity between terminals "E41-1" and "E38-8".

    If there is continuity, replace relay.

  4. Connect battery positive (+) terminal to terminal "E38-6" of relay. Connect battery negative (-) terminal to terminal "E38-7" of relay. Check for continuity between terminal "E41-1" and "E38-8". If there is no continuity when relay is connected to the battery, replace power integration relay No. 2.
    Fig 2: Inspecting A/T Relay
    G06500125Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals